Used EarthQuaker Devices Palisades V1

$159.99

EarthQuaker Devices Palisades Mega Ultimate Overdrive Features:

  • Boost: Sets the level of the output boost.
  • Volume: Sets the output level.
  • Tone: Brighter clockwise, warmer counter clockwise.
  • Gain A: Sets the gain for the Channel A (lower gain)
  • Gain B: Sets the gain for Channel B (higher gain)
  • Toggle Switches
    • Normal/Bright: Normal is a warm full tone, Bright is livelier tone with more chime.
    • Buffer: Turns the input buffer on or off. ON is a tighter and brighter tone while OFF is a warmer tone with more sag. The buffer is part of the drive circuit & is only available when the Palisades is activated.
  • Rotary Switches
    • Bandwidth: This sets the overall tone and gain structure of the Palisades. 1 is the thinnest setting with the least amount of gain and 5 is the fattest setting with the heaviest gain. Everything else is in between. This control has a major effect on all the settings of the Palisades, especially the gain and voice controls.
    • Voice: This sets the nature of the Palisades distortion by changing the clipping diodes. 1- No diodes: The most open and least distorted. 2- LED clipping:light clipping with a lot of volume. 3-
    • Mosfet clipping: light gain OD with great harmonics. 4- Asymmetrical Silicon clipping: Tighter light gain OD closest to stock 808. 5- Symmetrical silicon clipping: tighter distorted tone. 6- Schottky Diode clipping: Looser fuzzy tone.
  • Foot Switches
    • Activate: True bypass switch
    • Gain B: Activates Gain Channel B, Features Flexi-Switching.
    • Boost: Activates the output level boost, Features Flexi-Switching.
  • Flexi-Switching: This device features Flexi-Switch™  Technology on the Gain and Boost switches! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.
    • For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.
    • For momentary operation, hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed.
    • Since the switching is relay-based, it requires power to pass signal.
  • Power: The Palisades can be powered by a standard 9-volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages!
  • Current Draw: 45mA
  • Input impedance: 500K
  • Output impedance: <10K
Weight 1 lbs
Dimensions 6 × 6 × 6 in